USED FERNANDES / LA-85KK / ken Signature Model PRD [12]

ken signature model of L'Arc?en?Ciel from the 90s.
The entire body and neck are finished in bright red, and even the pickguard, pickup covers, and selector knob are all red.
The gold hardware looks great, and the lizard inlay on the 12th fret is impressive.
The ST type body and TL type reverse head neck also have a strong impact in terms of looks.
Alder body and maple neck/fingerboard with 24 frets, S-S-H pickup layout with coil tap on the rear pickup by mini switch.

There is a large ding on the body side on the 6th string side and a paint chip near the jack.
There are many scratches, dings, and paint chips scattered throughout the body and neck, and the gold parts are tarnished and some of the plating is peeling.
The original arm is included, but the plating is peeling due to rust.
Although it has a strong sense of use, each part has been maintained and cleaned at our repair center, and playability is good.
The strap pin has been replaced with a Schaller locking pin, but the strap side parts are missing.
A non-genuine hard case is included.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Non-genuine hard case
Accessories: Genuine arm
Weight: 3.96kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Case
Non-genuine hard case

Accessories
Genuine arm

Weight
3.96kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment