USED Paul Reed Smith (PRS) / SE Custom 22 Semi-Hollow Metallic Red [12]

This model can be used for a wide range of genres with its small semi-hollow body.
The semi-hollow construction of the solid-body CUSTOM 22 allows it to be used not only for rock, but also for jazz, fusion, pop, and a wide range of other genres.
The two humbucker pickups and the hollow body's unique soft and expansive sound produce not only a beautiful clean tone, but also a boomy drive sound that cannot be achieved with a solid guitar.

There are paint chips on the tip of the head and the 6-string end of the top of the body, dents on the body end, large scratches on the body back, and metal parts and screws are dull and rusty.
The body back has large line scratches and metal parts and screws are dull and rusty.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: H06226
Year of manufacture: 2007
Country of manufacture: Korea
Case: Non-authentic hard case
Weight: 2.74kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.4mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings for setup: D'Addario EXL120 / .009-.042 set

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial number
H06226

Year of manufacture
2007

Country of manufacture
South Korea

Case
Non-genuine hard case

Weight
2.74kg

Truss Rod
No problem, confirmed to 60 degrees to the left and right of the rod

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.4mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL120 / .009-.042 set