USED FERNANDES / RE-95G / Ichiro Takikawa Cipher Model CGP [12]

CIPHER (Ichiro Takigawa) signature model is now in stock.
This model has been in the manufacturer's catalog since 1997, when he was active in CRAZE. It has a thin LP-shaped body with a bolt-on joint and a neck similar to the M-85C that was released earlier.
Like other signature models, it is based on the purple color and black hardware, and is full of the attention to detail that only a signature model can offer.
Maple top/mahogany back body, maple neck/rosewood fingerboard, and tone control is dummy.

There is a sticker mark on the back of the body, but the glue is stuck and cannot be removed.
There are paint peels on the tip of the head, by the 1st string peg, at the 6th string end of the body top, at the 1st string end of the body back, and by the back panel.
There are also many scratches and dents scattered throughout the instrument, giving it a feeling of use.
The neck is twisted and wavy, but has been set up at our repair center to a condition that does not interfere with playing.

Item Rank: B+: Some scratches, but no problem for normal use.

Case: Soft case
Weight: 3.77kg
Truss Rod: Checked up to 60 degrees left and right (torsion and waviness)
Fret Residuals: Still can withstand cutting, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.2mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Case
Soft case

Weight
3.77kg

Truss Rod
No problem, rod is checked up to 60 degrees to the left and right (torsion and waviness are present)

Fret Remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
22.2mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment