USED edwards / Snapper / E-SN-150FR MOD Black Cherry [12]

This Edwards version of SNAPPER is a popular all-around model.
It has an alder back, quilted maple top body, maple neck with 24 frets, and the pickguard has been replaced with a mirror instead of a pearloid.
All pickups are Seymour Duncan, with the front replaced with an SH-2 (Jazz), the center with an original STK-S4m, and the rear with an SH-4 (JB), and the wiring is such that the humbuckers are coil-tapped at half-tone.
The heel-less joint makes it easy to play at high frets, and the recess-mounted FRT-1000 allows for arm up/down!

There is a large paint peel on the body end, and paint chips are scattered around the jack.
The head top is dotted with large and small scratches and dings, and there are also dings on the neck grip.
The body also has minor scratches and dings scattered throughout, and the back panel is missing.
Although there are some modifications and signs of use, the instrument has been maintained and cleaned at our repair center, and is in good playability condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: ED1237559
Year of manufacture: 2012
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.75kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 21.8mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
ED1237559

Year of manufacture
2012

Case
Non-Genuine Soft Case

Accessories
Arm

Weight
3.75kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
21.8mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment