USED Fender Japan / JBG-70 Matte Brown [12]

Made in Japan jazz bass with a glossy, luxurious look.
This model was manufactured by Fujigen for only two years from 1993 to 1995, and features a matte brown matching head finish with ash wood grain, black guard, and gold hardware for a luxurious look.

Overall, there are scratches, dings, and paint chips scattered throughout, and the metal parts are dull and the plating is peeling.
The paint is matte, but there are some parts that have a glossy finish due to rubbing.
The playability is good as each part has been maintained and cleaned at our repair center.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: N081960
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.27kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.3mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 24.3mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, peg deformation correction, rubbing, burr removal (fret side, burrs due to paint fading), pickguard screw replacement, electrical repair (jack replacement)

Specs

Item rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
N081960

Year of manufacture
1993-1994

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.27kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.3mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
24.3mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, peg deformation correction, matching, burr removal (fret side, burrs due to paint fading), pickguard screw replacement, electrical repair (jack replacement)