USED Fender Japan / Jazzmaster JM66-80 MOD 3Tone Sunburst [12]

The Jazzmaster was favored by surf music in the 60's and by grunge/alterna types in the 90's.
This model has an asymmetrical offset body that is stable even when held while sitting down, and is equipped with a large single coil for a fat sound and beautiful clean tone.
Alder body, long scale like the Strat, rosewood fingerboard, floating tremolo, Alnico single coil combination, and preset switches for instant tone changes make this a versatile model.
The "springiness" of the floating tremolo, which can be fixed arm-up, and the synergy of the single-coil pickups with alnico magnets create a tone like no other guitar.
The bridge has been modified to a Nashville Tune-O-Matic, which prevents the strings from dropping and makes tuning more stable.

There is some paint peeling due to large dents on the body end.
There is a paint chip on the tip of the horn on the 6th string side and on the side of the elbow contour.
Overall, there are many fine scratches and large and small dents scattered throughout the instrument, and metal parts are dull and rusty.
Although there are many missing arms and signs of use, each part has been maintained and cleaned at our repair center, and playability is good.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: CIJ O046974
Year of manufacture: 1997-2000
Country of manufacture: Japan
Case: Non-authentic gig case
Weight: 3.64kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
Nut width: 42.1mm
Neck Thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Repair/Maintenance: Cleaning, string change, string height adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
CIJ O046974

Year of manufacture
1997-2000

Country of manufacture
Japan

Case
Non-genuine gig case

Weight
3.64kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

Nut width
42.1mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
23.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Repair and maintenance
Cleaning, string replacement, string height adjustment