USED Fender / 1979y Stratocaster / Maple Sunburst [12]

We are pleased to announce the arrival of a 1979 Stratocaster.
The originality is very high, and it is believed to be a full original.
The cutaway has some paint reaction, but there is no paint reaction on the back of the hard case, which is common, and it is in good playing condition.
The weight is 4.31kg, and it is a very high original.
The weight is 4.31kg, which is not too heavy compared to other instruments of the time, and is a good quality instrument.
The combination of the heavy body and the high-power "X-1" pickups is an excellent combination that gives a sense of nostalgia.
Nowadays, there are fewer and fewer good-quality pieces available. If you are looking for one, please give it a try!
neck date:none
body date:2093 1973y
POT date:R13779x3
condenser:circle D(71-82)
pickup date:1979yx3
bridge pickup=X-1
PEG:w.germany ORIGINAL
bridge/saddle/saddle bis:ORIGINAL

Maintenance was performed by our specialized department after arrival.
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, and nut adjustment have been done.

Item rank: B+: Some scratches, but no problem for normal use.

Serial Number: S922525
Year of manufacture: 1979
Country of manufacture: U.S.A.
Case: Original hard case
Accessories: Arm
Weight: 4.31kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 22.7mm
Neck thickness near 12th fret: 23.6mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
S922525

Year of manufacture
1979

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
4.31kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.8mm

Neck thickness near 1st fret
22.7mm

Neck thickness near 12th fret
23.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment