USED FERNANDES / MG-80X Black [12]

X JAPAN / hide" signature model MG-80X is now in stock.
Mahogany body, bolt-on maple neck, rosewood fingerboard.
The head top with F logo is impressive with rosewood veneer, gold pegs, and cloud inlay on the neck with binding.
The rear pickups are black cover degree, but the front pickups are cream bobbin open, which is an eye-catching design.
The simple specifications of one volume, pickup selector, and direct switch are characteristic of this instrument.

There are some dents scattered around the periphery of the head top, and the truss rod cover is missing.
There is a small ding on the fingerboard at the 18th fret of the second string, but it does not interfere with playing.
The elbow contour on the top of the body and the cutaway horn on the first string have large peeling paint chips.
The metal parts are dull, rusty, and the plating is peeling, but there are no problems with use.
Although there are many signs of use, each part has been maintained and cleaned at our repair center, and playability is good.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: ?
Case: Non-authentic soft case
Weight: 3.46 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard correction, fret replacement, fret adjustment, rubbing, front and rear escutcheon screws fixed and replaced

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
Serial No.

Case
Non-genuine soft case

Weight
3.46kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
22.3mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard correction, fret replacement, mortise and tenon adjustment, front and rear escutcheon screw fixation replacement