USED Ibanez / SRGT42 Iron Pewter [12]

RG with a through neck.
This spot model was produced only in 2003 in collaboration with a domestic music store.
Based on the RGT with RG body shape and through-neck construction, it is finished in iron pewter with metallic texture.
The 5-piece maple/walnut thru-neck has a rosewood fingerboard with 24 frets, and the body wings are made of American basswood.
This model has a 5-way selector with 2 humbuckers and can handle a wide range of sounds from a powerful humbucker sound to a delicate single-coil half-tone.

There is a ding on the end of the body, and there are some minor abrasions throughout.
The lock nut has been replaced with a black part, and the arm is missing.
Although it has some signs of use, it has been maintained and cleaned at our repair center, and is in good playability.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: C03071136
Year of manufacture: 2003
Country of manufacture: Korea
Case: Original soft case
Weight: 3.76kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.3mm
Neck thickness near 12th fret: 20.6mm
SCALE: 648mm (25.5")
RADIUS: 381mm (15")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
C03071136

Year of manufacture
2003

Country of manufacture
South Korea

Case
Genuine soft case

Weight
3.76kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
19.3mm

Neck thickness near 12th fret
20.6mm

Scale
648mm (25.5")

RADIUS
381mm (15")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing