USED Fender / American Ultra Stratocaster HSS Cobra Blue [12]

This practical model introduces the latest specs in a traditional form.
The American Ultra Series Stratocaster follows in the footsteps of the American Deluxe Series and American Elite Series.
Featuring a 10-14" compound radius fingerboard with medium jumbo frets, the unique Modern D-shaped neck has carefully rolled-off edges and new contouring on the body and neck heel.
Newly developed Ultra Noiseless Hot Strat single-coil pickups in the neck and middle positions and an Ultra Double Tap humbucker in the bridge provide a high-output yet transparent sound with a wide dynamic range.
The rear pickup can be tapped by turning on the S-1 switch built into the volume.
Locking tuners and stable tuning by 2-point tremolo support allow you to concentrate on playing.

There are some minor scratches and dents scattered throughout, and the metal parts are slightly tarnished.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: US20022971
Year of manufacture: 2020
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, arm, wrench, lock pin
Weight: 3.75kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 1F: 254mm (10") 12F: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs : .009-.042

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
US20022971

Year of manufacture
2020

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Certificate, Arm, Wrench, Lock pin

Weight
3.75kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Rest of frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.3mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
1F:254mm (10") 12F:305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment