USED Gibson / SJ DELUXE [12]

A 70s Gibson featuring a square shoulder is now in stock.
This model is a mid-70s SJ, resulting from the square shoulder specs that were changed starting in 1962. It is packed with specs unique to this era, such as a 3-piece neck with volutes, block position marks, down belly bridge, double X bracing, and more.
The condition is as follows: the neck has some original upsets and waviness, the string height is high, and there is some chattering at the low frets. There is a gap between the bridge and pickguard. This is a junk item that does not work perfectly.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 682978
Year of manufacture: 1970-1975
Country of manufacture: USA
Case: Non-authentic soft case
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and it is fine.
Fret Residue: Defective, need to consider replacing next time when repairing.
String height on bass string side: 4.1mm above 12th fret
String height on treble string side: 4.0mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 19.2mm
SCALE: 643mm (25.31")
RADIUS: 254mm (10")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: String replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
682978

Year of manufacture
1970-1975

Country of manufacture
U.S.A.

Case
Non-Genuine Soft Case

Truss Rod
No problem (Wave and high spring are present.)

Remaining frets
Defective, need to consider replacing the frets at the next repair.

String Height Low String Side
4.1mm above the 12th fret

High string side
4.0mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
19.2mm

Scale
643mm (25.31")

RADIUS
254mm (10")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance parts
String replacement