USED Paul Reed Smith (PRS) / Private Stock#4103 CUstom 24 McCarty Thickness Faded Pink (High Gloss Nitro Finish) [12]

This 2012 private stock features a pink body top, bird inlays, and headstock logo!
This CUSTOM 24 features McCarty body thickness and a stop tailpiece.
The body is a one-piece Corinna back with a Private Stock grade curly maple top, and the neck is a wide fat shape Corinna with an East Indian rosewood fingerboard.
Hardware includes a gear-covered Phase II Locking Tuner, ebony button pegs, and a gold-plated wraparound bridge.
The pickups are a combination of Vintage Bass and HFS, which symbolize the PRS sound of the mid-2000s, with a 3-way toggle switch and tone push/pull for coil tapping.
The gorgeous looks are of course attractive, but the quality of the instrument is impeccable, as each guitar is carefully crafted by top-notch guitar craftsmen using carefully selected woods and master craftsmanship.
There are some minor scratches on the back of the body and some minor dents on the neck, but it is in good condition with little signs of use.
The instrument has been maintained and cleaned at our repair center, and is in good playability.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial number: 12-195105
Year of manufacture: 2012
Country of manufacture: USA
Case: Original hard case
Accessories: Spec Sheet
Weight: 3.26kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 23.9mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
12-195105

Year of manufacture
2012

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Spec Sheet

Weight
3.26kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.5mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
23.9mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment