USED P-PROJECT / THE PUMPS BASS / PUM 4st Black [12]

A bass with professional specs by a Japanese component maker.
P-PROJECT is a component/custom-made guitar/bass brand that was established in Kobe in the 1990s and produced models for prominent Japanese guitarists.
THE PUMPS BASS, the original model of P-PROJECT's basses, is now in stock.

The compact body with a long horn on the 6th string side and a deep cutaway on the 1st string side is made of swamp ash, with a maple neck and 24-fret ebony fingerboard with bolt-on joints.

The compact head design, 3:1 pegs, height-adjustable nut, and Schaller bridge with flexible string-to-string pitch adjustment are all pro specs designed for studio use and tuning.

The pickups are EMG PJs, and P-PROJECT's original preamp allows fine tuning on the back plate side in addition to the knob on the top of the body.

This is a high-spec bass that can be used in the studio, live performance, and recording, regardless of the scene.

There are some minor scratches and dents scattered throughout, and the metal parts are dull.
It has a slight feeling of use, but has been maintained and cleaned at our repair center, so playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 170544
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.74kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 22.4mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
170544

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.74kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
40.2mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
22.4mm

Scale
864mm (34")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment