USED Fujigen / Neo Classic NLS20RFM Faded Cherry Burst [12]

This is a Japanese-made guitar that introduces modern specs to the traditional LP style.
This LP model is made by Fujigen, a long-established factory that pursues practical models under its own brand while producing many guitar makers on an OEM basis.

The chambered mahogany back/maple top body is laminated with flame maple veneer to create a luxurious look.
The set neck construction of the mahogany neck with rosewood fingerboard features Fujigen's proprietary circle fretting system, which produces a clear sound with good tone release and rise in both single notes and chords, and enhances the presence of the instrument in an ensemble. The pickups are Duncan 59s (with a Duncans).

Duncan 59 (SH-1) pickups are mounted on the front and JB (SH-4) on the rear, and each tone can be pulled up to sound as a single coil.
There is a long scuff on the upper part of the body back, but overall it is in good condition with only minor scratches and dings.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: L200434
Year of manufacture: 2020
Country of manufacture: Japan
Case: Original soft case
Accessories: Wrench
Weight: 3.93kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.9mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
L200434

Year of manufacture
2020

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Wrench

Weight
3.93kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.9mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment