USED Fender Japan / ST62-65 MOD JV Serial Black [12]

JV Serial Strat is now in stock!
This is an ST62-65 from the JV Serial period, a model from the early days of Fender Japan that has remained popular both in Japan and overseas, and is equipped with USA-made pickups as standard.
The neck/body date indicates that this guitar was made in 1983.

It has an alder body with a hard maple neck and rosewood fingerboard with 21 frets, but the fingerboard is scalloped.
The scalloped fretboard takes some getting used to, but once you get used to playing it, you will be able to play legato fingerings like guitarists such as RB and YJM.

The price is affordable due to the fact that the fretboard has been processed, so please consider this opportunity.
There are some minor scratches and dings scattered throughout, and the metal parts are dull.
The control knob and nut have been replaced, and the pegs have probably been replaced as well.
In addition to the replacement parts and modifications, the instrument has been cleaned and maintained at our repair center and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: JV42010
Year of manufacture: 1983
Country of manufacture: Japan
Case: Non-authentic gig case
Accessories: Arm
Weight: 3.37kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.0mm
Scale: 648mm (25.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, selector switch cleaning

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
JV42010

Year of manufacture
1983

Country of manufacture
Japan

Case
Non-Genuine Gig Case

Accessories
Arm

Weight
3.37kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.0mm

Scale
648mm (25.5")

Strings in setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, selector switch cleaning