USED Aria / FA-BW Almond Burst [12]

New Yorker style full acoustico in the vein of Di Angelico and D'Aquisto.
Traditional specs with Grover pegs, custom floating PU made in Japan, and other carefully selected parts. This model has a comfortable airy feel, rich bass, and lustrous tone.

It has 17" wide full acoustic construction with flame maple sides and back, spruce top body, and maple neck/ebony fingerboard with 22 frets.

Although affordable, this guitar is recommended as an entry-level jazz guitar model because of its authentic specifications.
There is a hole filled in on the side of the body next to the neck joint on the 6th string side.
The pickguard has been replaced, but the original is still included.
Overall, there are minor scratches and dings, and the hardware is dull.
The neck is a little high, so the high frets have been adjusted and there is no fretting or stuck sound.
There are some minor scratches and dings, and the hardware is dull.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: S110110493
Year of manufacture: 2011
Case: Hard Case
Weight: 3.19 kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right (with high spring).
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: D'Addario ECG24 / .011-.050 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
S110110493

Year of manufacture
2011

Case
Hard Case

Weight
3.19kg

Truss Rod
No problem (high spring)

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
20.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
D'Addario ECG24 / .011-.050 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing