USED GRECO / EG450 Tobacco burst [12]

We have a used Greco Les Paul in stock, assumed to be made in 1980 based on the serial number!
The lightweight hollow chamber body construction gives it a rich, raw, airy sound that shows the careful manufacturing of the time.
The mahogany neck is the same as the high-end models, and it has a reputation for its slim type and hot sustain.
This is one of the 80's made in Japan whose value has been reevaluated in recent years.
The price is also reasonable, so please consider it by all means.
Body: Sycamore wood Neck: Mahogany Rose fingerboard

The condition is good comparatively though the sense of use is seen in proportion to the age.
The pods have been replaced, and the condenser seems to have been replaced with a ceramic type.
Rear side is equipped with oil capacitor which is assumed to be original. It seems to have been used and repaired.
The condition of the performance is good, as it has been maintained by a specialized department. It can still be used.
Item rank: B+: Some scratches, but no problem in normal use.

Serial number: 07884
Year of manufacture: 1980
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.40kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 25.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
07884

Year of manufacture
1980

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.40kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
25.7mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment