USED YAMAHA / STH1000R 1984 CB [12]

Developed for guitarists seeking a harder sound, this model is equipped with the latest specs of the time.
It has a flat-top alder body with non-pickguard and binding, and high-power pickups with spinnex magnets, which can be bi-sounded (coil-tapped) by pushing/pushing the tone.

It has a 22-fret maple neck/rosewood fingerboard with fine tuners and the original locking bridge.

Controls are simple with one volume and one tone (with a built-in bi-sound switch) and a pickup selector with a 3-way toggle switch, making it intuitive and easy to concentrate on playing.
There is a paint chip near the tip of the head, as well as scattered scratches and dings throughout, and the hardware is dull.
Due to the structure of the fingerboard, the bridge radius is loose compared to the fingerboard radius, and the raw sound of the 2nd to 5th strings is a little tinny, but this does not affect the sound from the amplifier.
The arm is missing and there are some signs of use, but the playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 130361
Year of manufacture: 1984
Country of manufacture: Japan
Case: Soft case
Weight: 3.78kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 22.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 130361

Year of manufacture1984

Country of manufacture Japan

CaseSoft case

Weight 3.78kg

No truss rod problem.

Fret remainder can still withstand cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.2mm

Neck thickness near 1st fret 20.6mm

Neck thickness 22.4mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair