USED Ibanez / Prestige RG2560ZEX Abyss Blue Burst [12]

2010 model of the Prestige made in Japan.
Since its introduction in 1988, the RG has been the flagship model of Ibanez, with a rich lineup of various grades.

This new arrival is a Prestige grade model manufactured by Fujigen, one of the best guitar factories in Japan, and boasts the high quality and playability that can only be achieved by being made in Japan.

It has an ash body with binding, a 5-piece maple/walnut neck, and a rosewood fingerboard with 22 frets.
The Wizard HP Prestige, a very thin neck shape, ensures technical support and reduces hand strain over long playing sessions.

The pickups are S-S-H mounted DiMarzio/ibz RGs co-developed with DiMarzio.
It features a slightly loud and warm humbucking and a warm and balanced clean single coil sound.

The bridge is equipped with the original Edge Zero, which eliminates stress when muting the bridge due to its structure that does not interfere with fine tuners.
It is also compatible with the Zero Point System to maintain stable tuning.
Overall, there are scattered minor scratches and dings, and the hardware is dull.
Although there is a slight feeling of use, each part has been maintained and cleaned at our repair center, and playability is good.
The standard "intonation adjustment bolt" for octave pitch adjustment on the bridge is missing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: F1133018
Year of manufacture: 2011
Country of manufacture: Japan
Case: Original hard case
Accessories: Arm
Weight: 3.59kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 18.0mm
Neck thickness near 12th fret: 20.0mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number F1133018

Year of manufacture 2011

Country of manufacture Japan

Case Genuine hard case

AccessoriesArm

Weight3.59kg

No truss rod problemNo truss rod problem.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.3mm

Neck thickness near the 1st fret 18.0mm

Neck thickness near 12th fret 20.0mm

SCALE 648mm (25.5")

RADIUS356mm (14")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment