USED Gibson Custom Shop / Demo Mod Collection 1960 Les Paul Standard Lavender Sparkle Burst [12]

We are pleased to announce the arrival of a one-of-a-kind Demo/Mod Collection used instrument in good condition, based on a 1960s Les Paul, of which only a few were produced!
Based on the Custom Shop-made "1960 Les Paul Standard", this one was custom built with a modern look.

The body top color is "Lavender Spakleburst", an exclusive finish.
The lame color is a beautifully shining gradation, and combined with the magnificent figured maple, it makes for a very cool Les Paul.

Only the body top has a gloss finish, while the body sides, back, neck back, and head top have a satin finish.

The "Dirty Fingers +" pickups, Gibson's signature high-power pickups, are mounted in combination at the bridge and neck positions.
The open cover is a perfect match for the non-pickguard design.
The brightness and abundant gain make it a must have for metal and hard rock players.

The neck shape is 1960 SlimTaper, so it has the thin grip characteristic of the 60s, which, combined with the satin finish, will ease the burden of technical playing.

The pegs are equipped with Grover Keystones, so the tuning stability is excellent even when down-tuned, depending on the setting.
It is in good condition with only minor scuffs and scratches.
The strings have been replaced and cleaned in the store, and playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: DS0210
Year of manufacture: 2024
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity, maintenance tools
Weight: 4.18kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.9mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number DS0210

Year of manufacture 2024

Country of manufacture USA

CaseGenuine hard case

AccessoriesCertificate, maintenance tool

Weight4.18kg

No truss rod problemNo truss rod problem, confirmed up to 60 degrees to the left and right

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.3mm

Neck thickness near 1st fret 20.8mm

Neck thickness near 12th fret 23.9mm

SCALE 624mm (24.56")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment