USED Fender Custom Shop / 1960 Stratocaster Relic 2007 Burgundy Mist [12]

We now have a 1960 Strat in Burgundy Mist color.
With a center bookmatched alder body, flame maple neck, and slabboard quality rosewood fingerboard, this is a Custom Shop! This model has an attractive wood material that makes it look like a Custom Shop!

The "Relic" version is a vintage replica model that reproduces the most used condition among the series that reproduces three patterns of condition. The pickups are custom made based on the specifications of the time.

The pickups are made by a custom store based on the specifications of the period, and vintage specs such as 7.25" fingerboard radius and thin frets are used to embody the playing feel and sound of the early 1960's. The pickup selector has been replaced with a 5-way switch.
The pickup selector has been replaced with a 5-way, but the original 3-way selector is also included.
In addition to paint peeling, scratches, and hardware dulling due to the relic process, there are also many damages associated with use, such as buckle scratches on the body back.
The outer string height adjustment imo screw on the 6-string bridge saddle has been replaced due to a broken screw hole, but the original part is included.
The original parts are included. The guitar has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: R36143
Year of manufacture: 2007
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, arm, bridge cover, original selector switch (3-way)
Weight: 3.52kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.6mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number R36143

Year of manufacture 2007

Country of manufactureUSA

CaseGenuine hard case

AccessoriesCertificate, arm, bridge cover, original selector switch (3-way)

Weight3.52kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remainder problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near the 1st fret: 21.1mm

Neck thickness near 12th fret 23.6mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment