USED MUSIC MAN / 80s Sabre Bass, Modified Sunburst [12]

The 80s Music Man SABRE BASS has arrived.
Released shortly after the success of the StingRay, this model can be described as “another answer” that strongly retains the DNA of Leo Fender’s design era. It features the classic combination of an ash body and maple neck, equipped with two large humbuckers. Rather than simply prioritizing power, the series/parallel switch and tone circuit allow for a wide range of sound shaping—from robust lows to crisp mids.

The instrument we’ve received this time features a 1979 Saber body joined to a 1979 StingRay neck. As a result, the neck joint has been modified from a four-point to a three-point joint. The date stamped on the potentiometers—which appear to be original—is 1981; it is believed that parts replacement and modifications were carried out at “System Craft,” a bass specialty shop in Osaka.

The pickups are original, but the volume pot (1986), mini-switch, and jack have been replaced. The mini-switch functions as a pickup selector, allowing for series/parallel switching of the front pickup and series/parallel switching of the rear pickup.
The position of the string guide has been changed, and the strap pins and mute have been replaced. While it shows signs of wear appropriate for its age, there are no issues with its playability.
The nut and frets were replaced after the guitar was received, and the fingerboard was refinished as part of that process.
The rod nut (where the truss rod is adjusted) was stripped, so it was machined to metric specifications and repaired.
Currently, the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: C003390
Country of Manufacture: USA
Case: Non-original hard case
Weight: 4.58 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String Action (Treble Side): 2.0 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.1 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 864 mm (34")
RADIUS: 184 mm (7.25")
Strings at Setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.