USED Fender / American Original 60s Telecaster Burgundy Mist Metallic [12]

A Telecaster condensed from the popular specs of the 60's.
The main feature of this American original series is a design that flexibly combines the essence of each decade without being concerned with reissuing the specs of a specific year.
Rounded rosewood fingerboard with pearloid large dot inlays, 9.5" fingerboard radius, and vintage tall frets.
It is equipped with a Pure Vintage 64 Gray Bottom Single-Coil Tele pickup, which combines a vintage sound with modern playability.

There is a buckle scratch on the body back and the pickguard has been replaced with a pearloid.
(The original pickguard is missing.)
It has some signs of use, but has been maintained and cleaned at our repair center and has good playability.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: V1973175
Year of manufacture: 2019
Country of Manufacture: USA
Case: original hard case
Accessories: bridge cover
Weight: 3.54kg
Truss Rod: No problem, rod is 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs : .009-.042

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
V1973175

Year of manufacture
2019

Country of Manufacture
United States of America

Case.
Genuine hard case

Accessories
Bridge cover

Weight
3.54kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
25.2mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment