USED Fender Japan / Telecaster TL52-SPL Vintage Natural [12]

A variation model of the Telecaster made by Fender Japan.
Based on the '52-style Telecaster of yesteryear with ash body and maple neck/fingerboard, this model comes standard with front humbuckers, rotomatic pegs, and 6-way saddle.
The slim C-shaped neck grip, 184-radius maple fingerboard, and other specs emphasize ease of playability.
A massive SPL bridge with octave adjustment for each string is adopted to obtain rich sustain.
The front pickup is an original DRAGSTER and the rear pickup has been replaced with a Duncan STL-3 Quater Pound TL.

There are numerous play marks on the pickguard and dings on the top edge and end of the body on the 6th string side.
There are also scratches and dings scattered throughout the instrument, and there are paint cracks on the neck joint.
The neck joint has a paint crack. Although there are some signs of use such as tarnished metal parts, the playability of the instrument is good as it has been maintained and cleaned at our repair center, including replacement of the selector switch and jack plate.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: S034782
Year of manufacture: 2006-2008
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.24kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair (3-way switch replacement), jack plate replacement, nut groove correction (5th, 4th, 3rd strings)

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
S034782

Year of manufacture
2006-2008

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.24kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair (3-way switch replacement), jack plate replacement, nut groove correction (5,4,3 strings)