USED Fender / 1976 Stratocaster Sunburst [12]

We have a 1976 Stratocaster in stock.
The year of manufacture is determined by serial number, head logo features, pickup date on front/center (1976), and pot date on volume/front tone (1377525).
The pegs, 3-4 string guides, and nut have been replaced, but the frets appear to be original.
The front/center pickups are original, but the rear pickup has been replaced with an unknown make and model.
The bridge saddle has been replaced (original included) and the strap pin has been replaced (original missing).
Several screws with signs of use are included, and the pickguard screws and pickup mounting screws may have been replaced.

There are large paint peels on the fingerboard surface at the first fret and on the side of the neck on the first string side, and some paint peels on the fingerboard edge on the sixth string side.
Scratches and dings are scattered around the head side and tip, and the body as a whole has many age-related scratches, dings, and paint chips.
The neck is wavy and twisted, and the frets are quite worn, but there are no major problems with playability at this time.
It has been cleaned, maintained, and set up at our repair center.
The arm is missing.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 675375
Year of manufacture: 1976
Country of manufacture: USA
Case: Original hard case
Weight: 4.05kg
Truss Rod: No problem, rod is in 60 degree position (torsion and waviness)
Fret remainder: Need to consider replacing the frets next time it is repaired.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.4mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
675375

Year of manufacture
1976

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
4.05kg

Truss Rod
No problem, confirmed up to 60 degrees on both sides of the rod (torsion and waviness)

Fret remainder
Need to consider replacing the frets at the next repair

String height on bass string side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
41.4mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment