USED Squier / Vintage Modified Bass VI 3-Color Sunburst [12]

This is a high cost performance model of BASS VI that rarely appears in used condition.
The BASS VI was manufactured by Fender from 1961 to 1975, and was re-produced several times after that due to demand.
This is a very affordable model released by Squier, Fender's entry-level brand.
Basswood body, maple neck and rosewood fingerboard with 21 frets, 3 Jaguar type pickups.
Controls include volume/tone, an on/off switch for each pickup, and a bass cut switch.
This instrument is tuned one octave below the regular tuning of an electric guitar, but is positioned as a "bass" according to Fender's official website.

There is a paint chip on the neck joint, but overall the instrument is in good condition with only minor wear and tear.
The arm is missing and the neck is a little wavy, but all parts have been maintained and cleaned at our repair center, and playability is good.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial number: 311739580
Country of manufacture: Indonesia
Case: Soft case
Weight: 4.15kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Height: No problem, fret height is high enough.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 23.6mm
SCALE: 762mm (30")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL156 / .024-.084 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

Specs: D'Addario EXL156 / .024-.084 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
311739580

Country of manufacture
Indonesia

Case
Soft case

Weight
4.15kg

Truss Rod
No problem (slight waviness)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
19.9mm

Neck thickness near 12th fret
23.6mm

Scale
762mm (30")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL156 / .024-.084 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment