USED Paul Reed Smith (PRS) / SE EG See Through Blue [12]

This is the earliest model of the SE series.
This Student Edition model was created on the advice of Carlos Santana.
Flat top mahogany body with 3 single coil pickups mounted on the pickguard.
As with the USA-made model, the bridge is die-cast with saddles on both sides to suppress unwanted shaking, and the headstock is designed to keep the strings as straight as possible all the way to the pegs.

There is a large buckle scratch on the back of the body, and many fine scratches and dents are scattered throughout.
The arm is missing and there are some signs of use, but each part has been maintained and cleaned at our repair center, so the playability is good.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: E10443
Year of manufacture: 2004
Country of manufacture: Korea
Case: Original soft case
Weight: 3.25kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.9mm
SCALE: 635mm (25")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, and electrical repair

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
E10443

Year of manufacture
2004

Country of manufacture
South Korea

Case
Genuine soft case

Weight
3.25kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.3mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.9mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair