Ibanez / BTB865SC-WKL Weathered Black Low Gloss [20]

The BTB865SC is a 2022 model that inherits the concept of the BTB865, but makes it even easier to play and has an all-new sound. It has been significantly updated with new frets, fretboard and body materials, pickups and EQ, and a finger ramp.
Long sustain, rich resonance, and high rigidity with through-neck construction.
The 5pc neck combines maple and hard walnut for clear sound image and attack. The rigidity is reinforced by graphite rods installed inside the neck.
The through-neck construction provides long sustain and rich resonance, and the seamless feel of the neck back across the entire fret range is one of the greatest features of the BTB bass.
35" extra long scale adds sufficient tension and clarity in the low register for LOW-B.
Single-cut body with ash top, ocoume wood & ash wood laminated wings
The double-winged winged body sandwiches the neck and is made of a laminated structure combining ash wood, which has a clear and crisp sound, and okoume wood, which is rich in mid-range and low register characteristics. The 5th string side is a single-cut body with the body and neck jointed at the 12th fret, without a cutaway, in order to achieve the body's resonance and longer sustain.
The back side of the upper horn section has a scoop contour finish to improve accessibility.
Bartolini BH2 pickups
The Bartolini BH2 pickups feature a well-balanced warm response with a tight bottom end and rich midrange.
MR5 (monorail) bridge
Each string is independent of the other, and this bridge transmits the string vibration directly to the body.
Active 3-band EQ with 3-pattern mid-band frequency switch & EQ bypass switch
The equalizer produces an active sound with a wide range and low noise, and the midrange frequency can be switched between 250Hz, 450Hz, and 700Hz by toggling the switch. (006P battery powered)
Zero fretting for accurate intonation and minimal difference between open/pressed string sounds
Finger ramps for stable form and improved playability
Exclusively shaped, matte black color finger lamps are standard equipment. (already attached, not removable).
Stainless steel frets for bright sound quality and high durability
Neutrik jack with lock function to prevent plugs from falling out
D'Addario NYXL45130SL
Accessories: Original gig case
Serial number: I21114628
Weight: 4.35kg

* The color and brightness may look slightly different depending on the monitor environment. Please understand that the color and brightness may slightly differ depending on the monitor environment.

Specs

Neck Type
BTB6 5pc Maple/Walnut neck with Graphite reinforcement rods

Body
Ash top / Ash / Okoume wing body

Fretboard
Rosewood fretboard w/Abalone dot inlay

Fret
Medium Stainless Steel frets

Number of frets
24 (+ zero fret)

Bridge
MR5 bridge (19mm string spacing)

Neck Pickup
Bartolini BH2 neck pickup

Bridge Pickup
Bartolini BH2 bridge pickup

Equalizer
Ibanez Custom Electronics 3-band EQ w/3-way mid frequency switch

Hardware Color
Black

Strings gauge
.045/.065/.80/.100/.130 (D'Addario NYXL45130SL)

Tuning
1G,2D,3A,4E,5B

Neck Dimensions

Neck Dimensions
889mm/35"

Width at Nut
Width at Nut

Width at Last Fret
Thickness at 1st

Thickness at 1st
Thickness at 1st

Thickness at 12th
Thickness at 12th

Radius
400mmR