USED Martin Martin / 2013 HD-28V [20]

This model is a reissue of the pre-war D-28. It features forward-shifted scalloped X-bracing, herringbone top with ivoroid binding, diamond-and-square fingerboard inlays, butterbean-type pegs, long saddle, V-shaped neck, tortoiseshell pickguard with string pin dots, and a tortoiseshell-patterned pickguard with string pin dots. The pickguard has a tortoiseshell pattern and string pin dots, and the top board is lightly tinted as if it had been aged.

* After our arrival, the bracing was corrected, binding was glued and added (at the neck end) by an authorized import agent, and it is in good playing condition.
There is a lacquer burn on the lower part of the bridge, but other than that, it is in good condition with few signs of use.

Item rank: B+ (Good)

Year of manufacture: 2013
Truss rod: There is enough room.
Fretboard: 80% or more
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.08kg
Serial ： 1744000

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fretboard: No problem, enough fretboard height.
String height(bass string side)|3.0mm above 12th fret
String height(treble string side)|2.5mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness (near 12th fret)|-
SCALE|645mm (25.4")
RADIUS|406mm (16")
Strings used for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, bracing correction, binding correction

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
3.0mm above 12th fret

String height (treble string side)
2.5mm above 12th fret

Nut Width
44.0mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
645mm (25.4")

RADIUS
406mm (16")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, bracing correction, binding correction