USED Guild Guild / F30HG Natural [20]

Probably a 90's Westerly Guild F30HG (High GlossLacquer).
Solid spruce top, solid mahogany side and back, mahogany neck, rosewood fingerboard and bridge.
You can experience the solid sound typical of Guild.

* After our arrival, cleaning, overall adjustment (string change, rod adjustment, string height adjustment), binding correction, bracing correction, deburring, fret rubbing, and bridge crack correction have been done.
The binding seems to have been peeled off for a long time, and there are many paint cracks near the binding.
The neck is twisted and has a high spring condition, and has been adjusted by fret adjustment.
The frets are low due to the fret adjustment.
The playing condition is good since the above adjustments have been made.
There is a gap at the neck joint where the binding was pulled, and there are scratches and weather checks throughout.

Item rank: B+ (Good)

Truss rod : There is enough room.
Fret : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 1.82kg
Serial ： AF300781

Truss rod: No problem, confirmed up to 60 degrees left and right (not much left)
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.7mm above 12th fret
String height(treble string side)|2.2mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|406mm (16")
Strings used for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, binding gluing, bracing gluing, deburring, and mortising

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.7mm above the 12th fret

String height (treble string side)
2.2mm above the 12th fret

Nut width
43.3mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
628mm (24.75")

RADIUS
406mm (16")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, binding gluing, bracing gluing, deburring, and matching