USED Fernandes Fernandes / JAM-95T Judy and Mary Takuya Model [20]

JUDY AND MARY Takuya signature model.
Maple neck with maple fingerboard, and the head is decorated with an emblem on the original design as if it were a signature model.
Equipped with two FGI pickups, this model has a solid sound with little noise typical of active pickups.

* After arrival at our store, it has undergone cleaning, overall adjustment, fret adjustment, net groove correction, electrical repair, and fret deburring.
The neck has some waviness, which has been adjusted by fret adjustment, and the frets have been lowered accordingly.
There is a problem with the neck angle, and shimming was done to create a small gap in the neck pocket on the first string side.
The guitar has been adjusted and corrected in various ways, so it is in good playing condition.
There are many scratches and dents overall, especially on each corner of the body, and there are many dents with paint cracks.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard: less than 50%.
Attachment ： Soft case/not genuine
Weight ： 4.2kg
Serial ： No serial number

Truss Rod : No problem (Wavy)
Fret remainder: There is a note that it can still withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.2mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|23.8mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring, mortise and tenon adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
There is a note that the frets are still low enough to withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.2mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
23.8mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring, matching, electrical repair, nut adjustment