USED Warwick Warwick / STREAMER LX4 [20]

The LX is a bolt-on model with excellent cost performance.
The LX is equipped with Warwick's well-known Active MEC PU, which allows for a wide range of sound-making possibilities.
The bellblass frets and separate bridge give it an exquisite attack that no other bass can match.

* When we received this bass, the neck was twisted and the frets were adjusted by fret adjustment. However, the high left foot of the 4th string has chatter, so we have adjusted the string height by 2.7mm on the 6th string side 12F and 2.2mm on the 1st string side 12F.
The truss rod has reached its limit, and is currently slightly warped.
In addition, cleaning and overall adjustment (string replacement, rod adjustment, octave adjustment, and string height adjustment) have been performed.

There are paint cracks on the body back and joint.

Item rank: B (average)

Year of manufacture: 2003
Truss Rod ： Tightened
Fretboard: 60-70%.
Accessories: soft case/not genuine
Weight ： 4.48kg
Serial ： C 098323 03

Truss rod is defective and neck is warped at the rod limit.
Fretboard: No problem, sufficient fretboard height.
String height (bass string side)|2.7mm above 12th fret
String height(treble string side)|2.2mm above 12th fret
Nut width|38.5mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|25.5mm
SCALE|864mm (34")
RADIUS|508mm (20")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Neck warps at the limit of the rod due to defects

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.7mm above 12th fret

String height (treble string side)
2.2mm above 12th fret

Nut Width
38.5mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
25.5mm

Scale
864mm (34")

RADIUS
508mm (20")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment