USED momose momose / MFV BKR-PKM/NJ BLK-PG [20]

This is a very limited edition model made of two-piece black corina wood.
The body and neck are made of luxurious black corina wood, with a top lacquer finish and a thin urethane undercoat that is unique to Momose.
The fingerboard is also made of Madagascar rosewood, which is a perfect match with the hard characteristics of the Korina.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, and nut adjustment were performed. The playing condition is good, including neck warp and string height.
There is a noticeable scratch at the base of the back of the neck, but there are no other noticeable damages.

Item rank : B+ (Good)

Year of manufacture : 2017
Truss rod : There is plenty of room
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： Japan
Weight ： 2.74kg
Serial ： 5697

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|23.2mm
SCALE|628mm (24.75")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
23.2mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, nut adjustment