USED Martin Martin / 2002 DXM Dreadnought [20]

This is a dreadnought-shaped acoustic guitar made in the USA with an excellent cost-performance model.
This guitar is made of high pressure laminate wood finished in an environmentally friendly manner, and is one of the most affordable Martin guitars with excellent playability.
The simple looks and traditional finish of a classic Martin guitar.

* After receiving this guitar, we have cleaned it, replaced the strings, adjusted the rods, adjusted the string height, glued the bridge, and glued the neck heel.
The rod has been checked up to 60 degrees to the left and right, and there is no problem.
There are scratches and tarnish on metal parts, floating on the top of the body, and scratches on the head.

Item rank: B+ (Good)

Year of manufacture: 2002
Truss Rod ： Nearly fully tightened
Fretboard : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.12kg
Serial ： 899558

Truss Rod : No problem, confirmed up to 60 degrees left and right (not much left)
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.7mm above 12th fret
String height(treble string side)|1.8mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness(near 12th fret)|-
SCALE|648mm (25.5")
RADIUS|406mm (16")
Strings used for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, bridge gluing, neck heel gluing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.7mm above the 12th fret

String height (treble string side)
1.8mm above the 12th fret

Nut width
42.3mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, bridge gluing, neck heel gluing