USED SCHECTER Schecter / C-6-FR Deluxe Lefty Satin Black [20]

This is a left-handed Schecter Diamond Series C-6 FR Deluxe guitar with excellent value for money.
It features Schecter Diamond Plus humbuckers and a thin C-shaped maple neck.
It is equipped with a Floyd Rose SGR tremolo for stable tuning even with intense arm playing.
The rosewood fingerboard with 24 narrow X jumbo frets is recommended for rock guitarists looking for a left-handed guitar.

* After our arrival, the guitar has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.
The nut on the 6th string side was too low, so it has been shimmed and adjusted, so it is in good playing condition.
There are no noticeable scratches.

Item rank: A (Beautiful)

Year of manufacture: Made in 2023
Truss rod: Plenty of room
Fret: 60-70%.
Accessories ： Gig bag / Non-genuine tremolo arm
Country of Origin ： INDONESIA
Weight ： 3.59kg
Serial ： RO23042811

Truss Rod : No problem.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.9mm
Neck thickness(near 1st fret)|19.9mm
Neck thickness (near 12th fret)|22.0mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.9mm

Neck Thickness (near 1st fret)
19.9mm

Neck Thickness (near 12th fret)
22.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing