USED YAMAHA Yamaha / TBJ-CST Terry & Blue Jeans Custom [20]

Alder body, maple neck, 22 frets and 184R rosewood fingerboard are the wood materials.
It is equipped with an original tremolo unit that provides smooth operation through fine tuning and original pickups that produce a clear and warm sound.
The body has some scratches and dings with paint cracks and dents, and there are some buckle scratches on the neck and the whole body.
Other parts are dull and the plating on the gold parts has faded.
The guitar comes with an expired instruction manual, flight hard case, certificate of authenticity, and fretboard guard.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

Item rank: B+ (Good)

Truss Rod: Nearly fully tightened
Fretboard: 60-70%.
Accessories: Hard case w/ instruction manual, genuine arm and bridge, certificate and fret guard
Country of origin ： Japan
Weight ： 4.00kg
Serial ： 077

Truss Rod : No problem (Not much left)
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.1mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness (near 12th fret)|23.9mm
SCALE|635mm (25")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret Remaining
There is a note that the frets are low, but can still withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
40.1mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
23.9mm

Scale
635mm (25")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment