USED Black Cloud Black Cloud / Black Smoker Sigma Tail Green Metallic [20]

This is a Stratocaster by Black Cloud, a Japanese guitar brand made in Nagano, Japan.
The body is made of 2-piece alder wood, the neck is maple with a rosewood fingerboard, and the bridge and pegs are made by GOTOH.
It is equipped with Black Cloud's original Kuwabara pickups, and a mini switch provides a rear pseudo-boost-like effect.
It is a high quality instrument with good weight balance and playability that can be used well for advanced playing techniques.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised after our arrival, so it is in good playing condition.

There are a few minor dents on the corners of the head, but other than that, it is in good condition with only minor scratches.

Item rank: B+ (Good)

Truss rod: There is plenty of room.
Fret: 60-70%.
Accessories: Gig bag/non-genuine arm
Weight ： 3.77kg
Serial : No

Truss Rod : No problem
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness (near 12th fret)|24.4mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
24.4mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and alignment