USED Taylor Taylor / Builder's Edition 912ce V Class [20]

The Builder's Edition is a brushed-up version of the top-of-the-line 900 Series.
Lutz spruce is used for the top wood, which shares with Adirondack spruce the tonal characteristics of strength, richness, and volume.
The sides and back are standard Indian rosewood.
The instrument is packed with the designer Andy Powers' special specifications, including a silent finish to suppress the sound of rubbing during recording, a soft chamfered body line, and a beveled cutaway to enhance the playability of the high position.

* After our arrival, it has been cleaned, string replaced, rod adjusted, string height adjusted, and mortised, so it is in good playing condition.

There are dents with paint dings on the body sides and body corners, but other than that, it is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: Made in 2021
Truss rod: There is plenty of room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.00kg
Serial ： 1209141196

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.4mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|44.7mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness(near 12th fret)|-
SCALE|631.7mm (24.87")
RADIUS|381mm (15")
Strings in setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.4mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
44.7mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
631.7mm (24.87")

RADIUS
381mm (15")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment