USED Takamine Takamine / DSP015 TBS [20]

This model is also a long-seller of Takamine, which is highly regarded for its Ereaco models.
The somewhat large body size allows you to enjoy a solid volume and crisp sound.
Equipped with an AD-1 preamplifier, it allows for ample sound makeup at hand.
In addition, presets can be programmed, allowing you to instantly change the sound depending on the band or song.

* After our arrival, it has been cleaned, string replaced, rod adjusted, string height adjusted, and rubbed together.
The neck has a high fretting problem, which has been adjusted by fret adjustment, but there is a slight chattering when the high frets are played hard.
The low frets are in good condition.

There is a ding on the top of the head and many dings with paint cracks on the top of the body. There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 2001
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： JAPAN
Weight ： 2.52kg
Serial ： 39040496

Truss rod: No problem, confirmed up to 60 degrees left and right (with high spring)
Fret remainder: There is a note that it can still withstand cutting, but the frets are low.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness(near 12th fret)|-
SCALE|645mm (25.4")
RADIUS|305mm (12")
Strings used for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
There is a note that the frets are still low enough to withstand cutting.

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
645mm (25.4")

RADIUS
305mm (12")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment