USED Fender Japan Fender Japan / TC72 Black [20]

Fender Japan Telecaster Custom.
This one is strongly reminiscent of Gibson guitars, with an ash body and maple neck, Fender humbucking in the front and TL pickup in the rear, and 2VOL/2TONE controls.
The mellow sounding front Fender humbucking contrasts with the edgy rear PU, but a wide range of tones can be created with the four controls.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair since we received it, so it is in good playing condition.

Three knob seals are missing.
There are many picking scratches and a long scratch on the paint surface on the body back.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2012
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 3.65kg
Serial ： MIJ JD12012748

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.9mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.9mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
23.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair