USED Squier by Fender Squier / Vintage Modified Telecaster SH Black [20]

The "Vintage Modified" series inherits the tradition and spirit of Fender USA and is produced under a new concept.
This model is equipped with humbuckers on the front, just like Keith Richards.
This is a Vintage Modified Telecaster HS with Duncan Design TE-103B and HB102 pickups.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and rubbed together, so it is in good playing condition.

There are many dents on the back end of the body with paint chips, and there is a ding on the corner of the first string side at the first fret.
There are also several dents with paint chips on the corners of the body, and overall, there are some minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: 2007
Truss rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories ： Soft case / Non-genuine
Country of Origin ： INDIA
Weight ： 3.83kg
Serial ： SH07046161

Truss rod: No problem (not much left), confirmed up to 60 degrees left and right.
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.6mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|22.7mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.6mm above 12th fret

Nut Width
42.1mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
22.7mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and alignment