USED Fender USA Fender / American Performer Stratocaster Honey Burst [20]

The Fender AmericanPerformer Stratocaster is manufactured at the Corona, California factory.
It is equipped with a Yosemite single-coil pickup that produces rich and expressive tones.
The Greasebucket tone circuit attenuates the low frequencies at the same time when the tone is turned down, preventing the sound from becoming muddy.
It also features a push/pull control that enables the neck pickup in all switch positions for a wider range of tones.
The Modern C shape neck with 9.5" radius fingerboard is equipped with 22 jumbo frets for smooth and accurate bending.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The arm is missing. It is in good condition with only minor scratches.

Item rank: B+ (Good)

Year of manufacture: Made in 2022
Truss Rod : Plenty of room
Fret: 60-70%.
Accessories ： Hard case / Certificate of Authenticity
Country of Origin ： USA
Weight ： 3.65kg
Serial ： US22032375

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|22.1mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.8mm

Neck Thickness (near 1st fret)
21.1mm

Neck Thickness (near 12th fret)
22.1mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment