USED Fullertone Fullertone / Stroke 54 Rusted 2Tone Sunburst [20]

The ST model STROKE is made by Fullertone, which is highly regarded for its traditional style guitars.
This STROKE 54 model is a reissue of the 1954 STROKE model and is a Rusted spec with vintage-inspired weatherchecking and light aging.
Two-piece ash body center, one-piece maple neck with soft V-shave. The pickup covers have a unique rounded shape, and the 54 style is well reproduced.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

The guitar has originally been subjected to a relic process, so we cannot tell if there are any new scratches or other defects.

Item rank: B+ (Good)

Truss Rod : Plenty of room
Fret: 60-70%.
Accessories ： Soft case / Non-genuine Non-genuine arm
Country of Origin ： JAPAN
Weight ： 3.00kg
Serial ： 1311559

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.7mm
Neck thickness(near 1st fret)|21.3mm
Neck thickness (near 12th fret)|24.5mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
41.7mm

Neck Thickness (near 1st fret)
21.3mm

Neck Thickness (near 12th fret)
24.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing