USED G&L G&L / Limited Edition Tribute Series Made in Japan L-2000 Figured Maple Top [20]

The Tribute series is made in Japan with high quality and high cost performance.
This is a limited edition model with figured maple cap top and ash back body.
Two powerful sounding humbucker pickups are mounted. The mini-switch allows you to switch between active/passive, series/parallel, Hi/Lo boost, etc., giving you a wide variety of sound control.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair, so it is in good playing condition.

There are many dents on the back of the neck with paint dents on the skunk stripe.
There are numerous dents around the head with paint cracks and dents in the wood.
There are many other scratches and dings with paint dents, and there is a sense of use.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories : Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 4.32kg
Serial ： T300071

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|22.3mm
Neck thickness (near 12th fret)|24.9mm
SCALE|864mm (34")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
44.0mm

Neck Thickness (near 1st fret)
22.3mm

Neck Thickness (near 12th fret)
24.9mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair