USED Ibanez Ibanez / Prestige S5470Q Wild Cherry Blossom [20]

This is a 2011 Ibanez Prestige series "S5470Q".
From the Prestige series, which pursues high-quality design and high playability, the S series has an amazingly thin shape toward the sides while having the same thickness as the RG in the center.
The combination of a well-balanced H-S-H arrangement and high-power pickups produces a wide-range, crisp sound.
The body is made of quilt top and mahogany back, producing a tone full of fatness and resonance despite the thin body.
The bridge is an Ibanez ZR-2 Tremolo equipped with the Zero Point System, which provides easy adjustment, stable pitch sound, and excellent playability and handling.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.
The neck has some rippling symptoms, and has been adjusted by fret adjustment.

There is a ding on the top of the head with clear paint cracking, and other minor scratches and dings.

Item rank: B+ (Good)

Year of manufacture: 2011
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine arm
Country of Origin ： Japan
Weight ： 3.41kg
Serial ： F1133364

Truss Rod: No problem, confirmed up to 60 degrees to the left and right (with waviness).
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|1.8mm above 12th fret
String height(treble string side)|1.4mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|17.0mm
Neck thickness (near 12th fret)|19.3mm
SCALE|648mm (25.5")
RADIUS|381mm (15")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
There is a note that the frets are low, but still can withstand cutting.

String height (bass string side)
1.8mm above the 12th fret

String height (treble string side)
1.4mm above 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
17.0mm

Neck Thickness (near 12th fret)
19.3mm

Scale
648mm (25.5")

RADIUS
381mm (15")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing