USED De Armond by GUILD / Starfire Custom Natural [20]

The "DeArmond by Guild" brand was derived in the midst of the Fender Group reorganization around the year 2000.
Based on Guild's Starfire, it was modified to semi-acoustic construction and equipped with two DeArmond USA gold foil pickup PUs.
It is equipped with a bridge and control knob with a rare D logo.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

There is clear paint floating on the top of the head board.
There are some parts with scratches, buckle flaws, and overall, there are some minor scratches and small dents.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories : Soft case / Non-genuine
Country of Origin ： KOREA
Weight ： 3.98kg
Serial ： 8074508

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|23.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
23.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing