USED Fender Custom Shop / MBS 1961 Hank Marvin Stratocaster N.O.S. Fiesta Red by Mark Kendrick [20]

This is a Shadows guitarist "Hank Marvin" signature model, made by Fender Custom Shop master builder Mark Kendrick, 2003.
It is equipped with a Race Sensor P.U.
The bird's eye maple neck is extremely classy and rarely seen even in recent Master Builder's products.

* After our arrival, it has undergone cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenor adjustment, and electrical repair.
The neck has some rippling symptoms, and has been adjusted by fret fret adjustment.
The frets are low due to the fret adjustment, which causes some chattering in the live sound, but the sound is coming out from the amp without any problem.

The gold parts have flaked off and there are some spots on the surface.
There are other signs of use such as minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: 2003
Truss rod: There is enough room.
Fret : Less than 50%.
Accessories ： Hard case / Genuine tremolo arm, bridge cover, certificate
Country of Origin ： USA
Weight ： 3.66kg
Serial ： R15719

Truss Rod : No problem, confirmed up to 60 degrees to both sides of the rod.
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.9mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|23.1mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at the next repair.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
41.9mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
23.1mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair