USED Fender Custom Shop Fender Custom Shop / Jimi Hendrix 1970 Stratocaster Prototype Olympic White [20]

The 1970 Jimi Hendrix Stratocaster Prototype was originally built around 1980 as a prototype for the planning and development of a Jimi Hendrix model, and was introduced to the market as a Custom Shop limited production model.
One-piece bird's eye maple neck, reverse head, and contours on the front of the body are distinctive features of this guitar.
The head decal is called "Head Serial", which is a genuine decal from 1980, and is attached as a left model.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The certificate is missing.
There is a small ding on the first string side of the 8F neck.
There are some minor scratches and dents overall, but there are no noticeable paint chips or dents, and it is in good condition.

Item rank: B+ (Good)

Year of manufacture: Made in 1995
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine arm, bridge cover
Country of Origin ： USA
Weight ： 3.76kg
Serial ： CA12609

Truss Rod: No problem, confirmed to be 60 degrees left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|23.3mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
23.3mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment