USED Paul Reed Smith (PRS) / SE Dave Navarro Beveled Maple Top Jet White [20]

This is the signature model of Dave Navarro, famous guitarist of the Red Hot Chili Peppers.
The Jet White body and head are pure white, and the contrasting PRS original gold parts make it a unique design.
The humbucker pickups on this model give the impression of a well-balanced sound with slightly reduced output.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and truss rod spacer installation have been done.
The truss rod adjustment was difficult. When the truss rod was tightened, the tip of the truss rod started to dip, and when loosened, the rod popped out little by little, and no change was seen in the neck condition.

The arm is missing.
The gold parts have some cusps, and there are other minor scratches, small dents, and other signs of use.

Item rank: B (average)

Year of manufacture: 2012
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： KOREA
Weight ： 4.13kg
Serial ： M28582

Truss Rod: Defective, neck warped at rod limit
Fret remainder: No problem, sufficient fret height
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|21.5mm
SCALE|635mm (25")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, truss rod spacer installation

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Neck warps at the limit of the rod due to defects

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.3mm

Neck Thickness (near 1st fret)
20.0mm

Neck Thickness (near 12th fret)
21.5mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, truss rod spacer installation