USED Stafford / SF-4F Brown Sunburst [20]

The SF-4F is fork-sized and smaller than a dreadnought, making it easy to handle.
The top is made of solid sitka spruce and the side backs are made of mahogany, and it is a higher series with glossy paint and herringbone binding.
And it can be used as an electric acoustico with pickups.

* After our arrival, cleaning, string replacement, rod adjustment, string height adjustment, rubbing, and electrical repair have been done.
The neck has some waviness, and the original fretting was rough, so the frets were unevenly fretted, so they have been adjusted with fret adjustments.
The piezo balance is not good, so the bottom of the saddle has been adjusted and balanced. The volume of the open 6th string is a little loud, but this is not a problem during strokes.

There are some signs of use such as minor scratches and small paint peeling.

Product rank : B+ (Good)

Year of manufacture: Made in 2022
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Weight ： 2.04kg
Serial ： SC22100565

Truss Rod : No problem (Slightly wavy)
Fret height is sufficient.
String height (bass string side)|2.4mm above 12th fret
String height(treble string side)|1.9mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|22.7mm
Neck thickness(near 12th fret)|-
SCALE|630mm (24.8")
RADIUS|508mm (20")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, rubbing, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight waviness).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.4mm above the 12th fret

String height (treble string side)
1.9mm above 12th fret

Nut Width
43.5mm

Neck Thickness (near 1st fret)
22.7mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
630mm (24.8")

RADIUS
508mm (20")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, rubbing, electrical repair